Camoplast TATOU 4S ATV, Руководство пользователя, Страница: 33 / 53

30
BREAK-IN PERIOD
BREAK-IN PERIOD
A break-in period is necessary in order to allow the components
of the system to match themselves to each others.
During the break-in period (4 hours or 80 kilometers), follow
these recommendations :
• Avoid running under dry and clean conditions. (For
example: asphalts, hay or straw field, etc).
• Start sharp turns at very low speed: (15 km/h maximum
at speedometer).
A GOOD break-in period must be done in a lubricated environ-
ment such as water, mud, snow, soft soil, sand, dust, etc.
A BAD break-in period can generate smoke, odors of burned
rubber as well as plastic deposits on the sprocket and/or the
frame.
Break in period Speed Commentaries
Verify the tension of the tracks,
readjust if needed.
Verify the vehicle alignment
1 hour
30 km/h maximum on the
speedometer
Verify the adjustments and the
alignment of your vehicle as stipulated
in section " adjustments " of your user
manual.
1 hour
50 km/h maximum on the
speedometer
Verify the adjustments and the
alignment of your vehicle as stipulated
in section " adjustments " of your user
manual.
1 hour
70 km/h maximum on the
speedometer
Verify the adjustments and the
alignment of your vehicle as stipulated
at section " adjustments " of your user
manual. Make sure that the
components don't have premature
wear
N/A Installation