Cameron Scanner 3100, Сетевое руководство

Страница: 16 / 37

12
Section 3 Scanner 3100 Wi-Fi & Advanced Networking Guide
4.
Under the ‘Wi-Fi Configuration’ heading;
a.
On the Enable Wi-Fi Port field select ‘Yes’ to enable the Wi-Fi port or ‘No’ to disable the Wi-Fi port
from the dropdown list.
b.
To configure the device to act as a wire
-
less access point, click on the Wi-Fi
Service Mode field and select ‘Wire
-
less Access Point’ from the Change
Wi-Fi Service Mode dialog, as shown in
Figure 19 .
c. Select the wireless transmit power from
the Wireless Transmit Power dropdown
list.
Figure 19 - Change Wi-Fi Service Mode dialog
5.
Under the ‘Access Point Configuration’ heading (which will only appear if you select Wireless Access
Point as the service mode), as shown on
Figure 20 .
a.
Select the Radio Band from the dropdown list. If you are unsure what the band is, choose 802.11n.
b. Select the Channel from the dropdown list or select ‘Auto’ to automatically connect to the channel.
c.
Select the Channel Width from the dropdown list.
d.
Type the SSID of the device into the SSID field. The default SSID is ‘Scanner3100’.
IMPORTANT Each device must have a unique SSID.
e.
On the Enable SSID Broadcast field select ‘Yes’ to broadcast the device’s SSID or select ‘No’ to not
broadcast the device’s SSID, and you will have to manually enter the correct SSID on the connecting
devices. The SSID field is not tolerant of variations and a mistake will prevent a device from connect
-
ing wirelessly to the Scanner 3100.
Figure 20 - Access Point Configuration section on the Modify Wi-Fi Configuration screen