Camera Motion Research Connex Mini Скачать руководство пользователя страница 2

Страница: 2 / 8

Accessory Quick Guide

Installing the Connex Mini transmitter CMR battery support and mounting cage

Step 1.

The Connex Mini transmitter cage ships assembled, and must be dis-assembled to install the transmitter. To

dis-assemble, remove the top two screws from the shipped assembled Connex Mini Cage as shown below.

The two screws to remove are located between the
battery clips that lock the small right angle bracket

Then remove the small right angle bracket.

Step 2.

Insert the Connex Mini into the cage.

Main
Mounting
Bracket

Step 3.

Position the hole in the small right angle bracket over the small protruding tab on the main mounting bracket.

Replace the two screws that were removed in

step 1

., and tighten firmly.

Содержание Connex Mini

Страница 1: ...Accessory Quick Guide 1 2018 Camera Motion Research LLC ...

Страница 3: ... by screwing them on Step 5 Insert the battery with the battery power port and the transmitter power port on the same side Step 6 Insert the JST connector on the power cable into the power port of the transmitter note it will click when fully inserted and insert the barrel plug into the battery ...

Страница 4: ...to standard HDMI converter and locking bar assembly into the transmitter micro HDMI input port as shown below Secure the locking bar with the 20 nut and tighten securely Note the HDMI locking bar nut also has a 20 tapped hole for mounting the transmitter ...

Страница 6: ...er ports are on the same side Insert the power cable C Removing the Batteries This applies to both the transmitter and the receiver Hold the cage in your hands so that you have a grasp of the cage and the battery Use your thumbs to press up on the clips and your index fingers to push out on the battery Remove battery ...