V1 Drop3 Size
Numeric value
between 000 and
999
The number of milliseconds that the valve will be
open to release the third drop.
Flash Delay
Numeric value
between 000 and
999
The number of milliseconds to wait after the
second drop to trigger the flash.
The following settings are only useful for advanced users with 2 valve sensors. The second valve
sensor should be plugged into the Sensor2 port.
Parameter
Options
Description
V2 Start Offset
Numeric value
between 000 and
999
The number of milliseconds from when the first
valve start to when the second valve starts. If
you want the drops at the same time set this to
0.
V2 Drop1 Size
Numeric value
between 000 and
999
The number of milliseconds that the valve will be
open to release a drop.
V2 Drop2 Delay
Numeric value
between 000 and
999
The number of milliseconds after the first drop to
start the second drop.
V2 Drop2 Size
Numeric value
between 000 and
999
The number of milliseconds that the valve will be
open to release the second drop.
The following settings are useful for users who want to take automatically take a series of shots that
demonstrate what is happening over time. One use of photos taken in this mode would be to make a
movie of what happens to the droplet over time.
Parameter
Options
Description
Flash Delay Auto
Inc
Numeric value
between 00 and 99
The number of milliseconds to automatically
increase the flash delay between each shot.
Each time you press Activate the valve will be
activated and the “Flash Delay” menu setting
above will be updated with a new value if this
is non-zero. This can also be used with the
settings below.
