Cameo ZENIT W300 TW, Руководство пользователя

Страница: 15 / 176

15
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
W-DMX
™
STATUS
W
-DMX
™
deactiva
ted
W
-DMX
™
activa
ted as receiver
, not paired
W
-DMX
™
activa
ted as receiver and is paired to device,
Transmitter is s
witched off or out of range
W
-DMX
™
activa
ted and is paired to device,
no DMX signal
W
-DMX
™
activa
ted as receiver and is paired to device,
DMX signal is present
W
-DMX
™
and transmission mode G3 is enabled
Up arro
w = Send opera
tion,
Do
wn arro
w = Receive opera
tion,
Arro
w flashes = P
airing process,
Flashing stops = P
aired
W
-DMX
™
and transmission mode G4S activa
ted
Up arro
w = Send opera
tion,
Do
wn arro
w = Receive opera
tion,
Arro
w flashes = P
airing process,
Flashing stops = P
aired
SETTING DMX START ADDRESS (DMX Address)
Press MODE to access the main menu (--- Menu ---). Using UP and DOWN, select the menu item
DMX Address (observe arrow) and confirm with ENTER. The display will show a three-digit num-
ber field and you can use the UP and DOWN controls to configure the desired DMX start address.
Confirm the entry with ENTER and press MODE to return to the main display (in the example,
„DMX address 001”).
---------------- Menu ----------------
DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
DMX Address
001
001
5xx
-
CONFIGURING DMX MODE (DMX Mode)
Press MODE to access the main menu (--- Menu ---). Using UP and DOWN, select the menu item
DMX Mode (observe arrow) and confirm with ENTER. In the submenu, you can now select the
desired DMX mode with UP and DOWN.
Confirm your selection with ENTER. Tables with the channel assignments can be found in these
instructions under DMX CONTROL.