Cameo S2 IP, Руководство пользователя

Страница: 24 / 236

24
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
Settings
Wireless settings
=
W-DMX
Settings
WDMX State
On Activate W-DMX
Off W-DMX deactivated
Operating
Mode
Receive W-DMX mode: Receiver
Transmit W-DMX mode: Transmitter
Transmitting
Mode G3 G3 transmission standard
G4s G4s transmission standard
Link
Link
Pair with W-DMX devices. W-DMX must be
enabled on all devices, and the pairing with a
transmitter be retained (Receive Reset).
Unlink Unpair all devices
Receive
Reset
No Cancel operation
Yes
Terminate the connection to all paired W-DMX
transmitters and set them to pairing standby
Display Reverse
=
Rotate
display
Off No display rotation
On
Display is rotated by 180° (e.g. for overhead installa-
tion)
Display
Off T
imer
=
Display
Lighting
Always On On permanently
Off after 20s
Deactivates after approximately 20 seconds of inactivity
Signal F
ail
=
Operational
status with
DMX signal
fault
Hold Last command is retained
Blackout Activates blackout
User Colour 8 Enables User Colour 8
Fade Out
10s
10s fade to blackout
Full On All LEDs at maximum brightness
Dimmer cur
ve
=
Dimmer
curve
Linear Light intensity increases linearly with DMX value
Exponential
Light intensity can be finely adjusted at lower DMX
values and broadly adjusted at higher DMX values
Logarithmic
Light intensity can be broadly adjusted at lower DMX
values and finely adjusted at higher DMX values
S-curve
Light intensity can be finely adjusted at lower and
higher DMX values and broadly adjusted at medium
DMX values
Dimmer
Response
= Dimmoven
LED Light responds abruptly to changes in DMX value
Halogen
Light behaves like a halogen spotlight with slight
brightness changes