Cameo S2 IP, Руководство пользователя

Страница: 21 / 236

21
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
Now set the desired colour as described in the instructions for the respective standalone mode
and press the left encoder (ENTER/Save) to confirm.
STANDALONE OPERATING MODE COLOUR SEQUENCE (Play Loop)
Starting from the main display, press the left-hand rotary-push encoder to access the menu
for selecting the operating mode. Turn the left encoder (SELECT) to select
Play Loop
(note the
selection arrow on the left) and confirm by pressing the left encoder (ENTER). Select one of the
8 pre-programmed but individually editable colour sequences by turning the left encoder again.
Confirm the selection by pressing the left encoder (ENTER). Now set the brightness (DIM) of the
colour sequence using the left encoder, the step duration (0.1 seconds to 21 minutes and 2 ran-
dom modes) and the fade time (0 seconds to 18 minutes and 2 random modes) using the middle
and right encoders (see illustration). The individual settings and renaming of the colour sequences
can be done in the menu item
Edit Loop
in the main menu.
Turn encoder =
Set brightness (DIM)
Press encoder =
Selection of the operating mode
Turn encoder =
Setting the fade time (t-fade)
Press encoder =
Open main menu (Menu)
Turn encoder =
Set step duration (t-step)
Press encoder =
Back to the colour sequence selection (Back)
EDIT STANDALONE OPERATING MODE PLAY LOOP (Edit Loop)
Starting from the main display, press the rotary-push encoder to enter the main menu (MENU).
Turn the left encoder (SELECT) to select the menu item
Edit Loop (note the selection arrow on
the left) and confirm by pressing the left encoder (ENTER). Now you can select one of the 8 colour
sequences by turning the left encoder and confirm the selection by pressing the left encoder
(ENTER).