24
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
Service
Default values
Factory
Resets to factory setting
User A
Resets to User A values (save user values: Settings -> Set
def. values)
User B
Resets to User B values (save user values: Settings -> Set
def. values)
User C
Resets to User C values (save user values: Settings -> Set
def. values)
Reset
All
Resets all motors
Pan / Tilt
Resets pan / tilt motors
Head
Resets motors in the device head
Test
Test Sequence
Pre-programmed sequence to test all components
Stress Test
Pre-programmed sequence to test all components under
maximum load
Run Motor
Activate all motors individually with values of 000 to 255
Reset Runtime
Service No
Do not reset service operation time
Yes
Reset service operation time
Lamp
No
Do not reset lamp operation time
Yes
Reset lamp operation time
Password
For service purposes only
QUICKLIGHT
Set up a scene quickly and easily using the basic Moving Head functions without an external
controller. Starting from the main display, press MENU to enter the main menu. Use UP and
DOWN to select
Quicklight
and press ENTER.
If the Quicklight mode is activated, the display does not automatically change to the main display;
when leaving the Quicklight menu, Quicklight mode is automatically terminated. The settings in
the Quicklight menu are retained until the next restart of the spotlight; as a result, Quicklight can
be accessed repeatedly with the same settings as long as the spotlight remains switched on.
After restart, the values in the Quicklight settings are reset (PAN = 000, TILT = 128, DIMMER =
255, ZOOM = 000, FOCUS = 000).
