Cameo OPUS SP5 PLUS, Руководство пользователя

Страница: 21 / 154

21
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
SERVICEMENU
Starting from the main display, press ENTER to enter the main menu. Use the UP and DOWN
control fields to select the Service menu and press ENTER.
This takes you to the submenu for editing the submenu items (select with UP and DOWN, confirm
with ENTER, change value with LEFT and RIGHT, confirm with ENTER).
Calibrate - Calibrate the components with values from 000 to 255 (password 050).
Test Manual - Manual testing of the components with values from 000 to 255.
Reset Motor - Reset the motors. All = All motors, Pan&Tilt = Pan and Tilt motors,
Head Only = Motors in the unit head.
USB Update - Firmware update via USB interface. OFF = Block firmware update via USB
interface. ON = Allow firmware update via USB interface.
Factory Reset - Reset to factory settings.
DEVICE INFORMATION (Info)
Starting from the main display, press ENTER to enter the main menu. Use the and controls to
select the information menu Info and press ENTER.
This will take you to the submenu for reading the device information (select with and , confirm
with ENTER).
System Info
Error info
Function error display
If a fault is not corrected by a reset or restart, the defective unit must be repaired by
an authorised service centre.
Tempera-
ture
Temperature display
Head xx°C/F°
Base xx°C/F°
Unit
Temperature display in degrees
Celsius or Fahrenheit