16
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
DEVICE MENU (Fixture Menu):
In the RDM/Fixture menu, select
Fixture Menu
and confirm the selection.
CONFIGURE DMX START ADDRESS
Select
DMX Address
, confirm the selection, set the desired DMX address and confirm the entry.
(highest value depends on the currently activated DMX operating mode)
SELECT DMX MODE
Select
DMX Mode
, confirm the selection, then select the desired DMX mode and confirm the
selection.
STATIC STANDALONE MODE
The Static standalone mode allows the Dimmer, Dimmer Fine, Strobe and RGBAL values to be set
directly on the device with values between 000 and 255, in a similar way to with a DMX controller.
In this way, an individual scene can be created without an additional DMX controller.
Select
Stand Alone
, confirm the selection, then select
Static
and confirm again. Now select the
menu item you wish to edit and confirm the selection. In the selected menu item, set the desired
value from 000 to 255 and confirm the entry. The values for the strobe effect correspond to the
values in channel 3 of the DMX table 7 CH 16 bit.
