14
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
Control via cable
(RJ45, W-DMX deactivated)
LED lights up
permanently blue
DMX signal is present
LED flashes blue
No DMX signal
LED off
Stand-alone
operation
Control via W-DMX
™
LED flashes red with
approx.1Hz
Activate W-DMX
LED flashes red quickly
Pairing with a
transmitter cancelled
and set to pairing
readiness
LED is permanently
lit green
Paired, DMX signal
present
LED flashes green
Paired, no DMX signal
OPERATION PER UNIT CONTROLLER CAMEO UNICON (optionally available)
Functions of the controls
Display
E BACK
Value up
↻
Value down
↺
Back
Back
✔
Confirm
After you have switched on the Unit Controller UNICON (briefly press BACK to switch it on),
"Update, Please Wait" appears briefly in the display (for service purposes only) and then the main
menu. Connect the remote unit to the Gallery Light G4 TW via network cable and connect the
spotlight to the power supply.
Select the menu item
RDM/Fixture
and confirm the selection. Now the system searches for
connected RDM devices (Discovery) and if the G4 TW is correctly connected and switched on,
a device is found (Discovered: 1). After a short time, the G4 TW is displayed as the only unit in a
list (the first part of the displayed RDM unit shows the unit model, the second part behind "/" is
the label and can be individually adjusted in the menu item
Label
for easier identification). Now
confirm to enter the submenu.
