8
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
DEVICE SETTINGS (Settings)
Press the encoder to access the main menu. Rotate the encoder to select the menu item “Settings” (left arrow) and confirm by pushing the
encoder. This will take you to the submenu for setting the submenu items (see table, rotate the encoder to select and push the encoder to
confirm selection). Now select the arrow symbol for “back” at the top of the submenu. Push the encoder and access the main menu in the
same way to return to the main display. The main display is activated automatically if no input is made within approximately 30 seconds.
---------------- Menu ----------------
DMX Address
DMX mode
Stand Alone
Slave
Settings
System Info
Settings
Display Reverse
=
Rotate display
Back
On
Display is rotated by 180° (e.g. for overhead installation)
Off
No display rotation
Display Off
=
Display lighting
Back
On
On permanently
Off
Deactivation after approximately 1 minute of inactivity
DMX fail
=
Operational status
with DMX signal
fault
Back
Hold
Last command is retained
or blackout,
Activates blackout
Full On
Spotlight switches to full on
Standalone
Stand alone mode is activated
Dimmer curve
=
Dimmer curve
Back
Linear
Light intensity increases linearly with DMX value
Exponential
Light intensity can be finely adjusted at lower DMX values and
broadly adjusted at higher DMX values
Logarithmic
Light intensity can be broadly adjusted at lower DMX values and
finely adjusted at higher DMX values
S-curve
Light intensity can be finely adjusted at lower and higher DMX values
and broadly adjusted at medium DMX values
Dimmer
response
=
Dimmer response
Back
LED
Light responds abruptly to changes in DMX value
Halogen
Light behaves like a halogen spotlight with slight brightness changes
LED Frequency
=
LED PWM
frequency
Back
800 Hz /
1200 Hz /
2000 Hz / 3600
Hz /
12 kHz /
25 kHz
Configuration of LED PWM frequency
Fan
=
Adjust fan control
Back
Car
Automatic fan speed control
Off
Deactivated fan with greatly reduced brightness
Constant Low
Constantly low fan speed with reduced brightness, if necessary
Constant Medium
Constant average fan speed with reduced brightness, if necessary
Fan
=
Adjust fan control
Constant High
Constant high fan speed
Factory Reset
=
Reset to factory
setting
Back
Reset Now!
Reset to factory settings
