Cameo F1 T, Руководство пользователя

Страница: 7 / 77

7
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
CONFIGURING DMX MODE (DMX Mode)
Press the encoder to access the main menu. Rotate the encoder to select the menu item “DMX Mode” (left arrow) and confirm by pushing
the encoder. You can now select the desired DMX mode by rotating the encoder. Confirm the selection by pushing the encoder. Select the
arrow symbol at the top of the menu for “back” and push the encoder to return to the main display. Tables with the channel assignment of
the different DMX modes can be found in these instructions under DMX CONTROL.
---------------- Menu ----------------

DMX Address
DMX Mode
Stand Alone
Slave
Settings
System Info
DMX Address
001
------------ DMX Mode ------------

5CH
4CH
3CH
2CH 2
2CH 1
1CH
STAND-ALONE MODE (Static mode)
Press the encoder to access the main menu. Rotate the encoder to select the menu item “Stand Alone” (left arrow) and confirm by pushing
the encoder. Now select the submenu item “Dimmer” and confirm by pushing the encoder and rotate the encoder to set the desired bright-
ness with values between 000 (blackout) and 255 (maximum brightness). Confirm your entry by pressing the encoder. A stroboscopic effect
can now be activated as required and set in the same way (strobe value 000 = strobe off. Value 001 = lowest flash frequency. Value 255 =
highest flash frequency). Now select the arrow symbol for “back” at the top of the submenu. Push the encoder and access the main menu in
the same way to return to the main display.
000
255
–
---------------- Menu ----------------

DMX Address
DMX mode
Stand Alone
Slave
Settings
System Info
Mode
Static
----------- Stand Alone ----------

Dimmer <255>
Strobe <255>
SLAVE MODE
Press the encoder to access the main menu. Rotate the encoder to select the menu item “Slave” (left arrow) and confirm by pushing the
encoder. Slave mode is now enabled, and the main display is automatically displayed. Connect the slave and the master units (same model)
with a DMX cable and enable the standalone mode static on the master unit. Now the slave unit will follow the master unit.
---------------- Menu ----------------

DMX Address
DMX mode
Stand Alone
Slave
Settings
System Info
Mode
Slave