Cameo CLQS40TW, Руководство пользователя

Страница: 7 / 78

7
DMX
DEUTSCH
FRANCAIS
ESP
AÑOL
ENGLISH
IT
ALIANO
POLSKI
SYSTEM SETTINGS (settings)
To access system settings, press the MODE button repeatedly until "Menu DMX Addr” or “Menu Mode” appears in the display. Now select
the menu item "Menu Settings" using the UP and DOWN keys and press ENTER. Now select the desired submenu item, but this time with
the buttons UP and DOWN and confirm with ENTER (see tables, note submenus).
Menu
Mode
DMX mode
01CH
ENTER
UP/DOWN
ENTER
UP/DOWN
Mode
DMX
DMX mode
02CH
DMX mode
03CH1
/ /
ENTER
DMX mode
03CH2
DMX mode
07CH
/
-
Mode
Static
Static
Dimmer
Static
CT
ENTER
UP/DOWN
ENTER - UP/DOWN
ENTER - UP/DOWN
Dimmer
000-255
ENTER
CT
000-255
(cool-warm)
ENTER
ENTER
Mode
Slave
/
ENTER
UP/DOWN
Mic Sens
00-99
ENTER
Mode
Sound
/
/
/
Settings
Display Rev = rotate display by 180° Display Rev On = rotate display by 180° (e.g. for overhead installation)
Display Rev On = normal orientation of the display
Display = automatic display shutdown Display On = permanently on
Display Off = automatic display shutdown after approximately 1 minute
of inactivity
DMXFail = operating status with DMX
signal fault
Hold = last command is retained
Blackout = activates blackout
Dim.Curve = dimmer curve Linear = light intensity increases linearly with DMX value
Exp = light intensity can be finely adjusted at lower DMX values
and broadly adjusted at higher DMX values
Log = light intensity can be broadly adjusted at lower DMX values
and finely adjusted at higher DMX values
S-Curve = light intensity can be finely adjusted at lower and higher
DMX values and broadly adjusted at medium DMX values
Dimmer Resp. = dimmer sensitivity LED = spotlight responds abruptly to changes in DMX value
Halogen = spotlight behaves like a halogen spotlight with soft
brightness changes
White Balance = white balance cool white
warm white
= individual white balance. Cross-mode configuration of the
2 cool white and warm white LEDs