20
DMX
IT
ALIANO
POLSKI
ESP
AÑOL
FRANCAIS
DEUTSCH
ENGLISH
INSTALLATION AND MOUNTNG
Thanks to its integrated rubber feet, the lamp can be positioned in a suitable location on a level surface. Traverse installation can be achie-
ved with the help of two Omega brackets, which are attached to the base of the device
A
. 2 x Omega brackets are included. Suitable beam
clamps are available as an option. Ensure firm connections and secure the spotlight to the securing lug with a suitable safety cable
B
.
Important safety notice:
Overhead mounting, especially above persons, requires extensive experience, including the
calculation of the load limit values of the installation material and regular safety inspection of all installation materials and
spotlights. If you do not have these qualifications, do not attempt to perform an installation yourself. Refer instead to a
qualified professional.
REPLACING THE LAMP
Important:
Replacement of the lamp may be carried out by qualified personnel only. If you do not have these qualifications, do not attempt
to replace a lamp yourself. Refer instead to a qualified professional.
A hot discharge lamp is under high pressure and can therefore spontaneously explode. Let the lamp cool for at least 30 minutes
before opening it.
When replacing light bulbs, use only the model specified in the data sheet.
Do not touch the glass bulb of the lamp with bare fingers, the lamp must be completely clean.
When replacing the lamp, wear protective glasses and protective gloves.
B
A
A
