Step 2
Page 2 of 3
© 2009
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Order #XXXXX -
Velcro attched to LOWER
back of extrusion bar
GREEN STAR
indicates
location of connection
lock with knob.
Turn Knob Clockwise
to Tighten Lock
RED STAR
indicates location of connection
bar with knobs on BACKSIDE of unit.
Rear View of Display
**
Do not over tighten Knobs.
**
Knob
Knob
Part Number
1
8
8a
9
9a
10
11
12a/12b
13a/13b
14
Qty
2
1
1
1
1
1
1
1/1
1/1
2
Description
Base Plate
47”h Lower Vertical Extrusion
47”h Corner Extrusion
47”h Upper Vertical Extrusion
47”h Corner Extrusion
48.115” Lower Curved Extrusion
48.115” Upper Curved Extrusion
52.476” Horizontal Curved Extrusion
52.476” Horizontal Curved Extrusion
25”w Horizontal Extrusion
Steps:
1) Attach vertical extrusions to base plates [8 to 1 and 10 to 1].
2) Connect vertical pieces together [8/8a to 9/9a and 10 to 11].
3) Connect curved extrusions together [12a to 12b and 13a to 13b].
4) Attach horizontal assembles [12a/12b and 13a/13b] between
vertical assemblies as shown.
1
1
8
9
10
11
12a
13b
12b
13a
Connection
Bar
Slide Connection Bar
between Extrusions
and tighten Knobs
to secure.
Connection
Bar
Connection
Bar
Graphic Attachment
Apply graphics to back
of assembled backwall.
A
B
B
C
Velcro attched to UPPER
back of extrusion bar
8a
9a
Note
: Extrusions 8/8a and 9/9
must stay assembled when shipping.
14
14
Velcro attched to UPPER
back of extrusion bar
Velcro attched to LOWER
back of extrusion bar
Backwall Assembly (Cont’d)
