Step 1
Page 1 of 3
© 2009
WHEN DISASSEMBLING ALUMINUM EXTRUSION, TIGHTEN ALL
SETSCREWS AND LOCKS TO PREVENT LOSS DURING SHIPPING
Order #XXXXX - Backwall Assembly
Part Number
1
2
3
4
5
6a/6b
7a/7b
Qty
2
1
1
1
1
1/1
1/1
Description
Base Plate
48.115” Lower Curved Extrusion
48.115” Upper Curved Extrusion
47”h Lower Vertical Extrusion
47”h Upper Vertical Extrusion
52.476” Horizontal Curved Extrusion
52.476” Horizontal Curved Extrusion
Steps:
1) Attach vertical extrusions to base plates [2 to 1 and 4 to 1].
2) Connect vertical pieces together [2 to 3 and 4/4a to 5/5a].
3) Connect curved extrusions together [6a to 6b and 7a to 7b].
4) Attach horizontal assembles [6a/6b and 7a/7b] between
Base Plate Attachment
1
1
Connect Vertical Extrusion to
Base Plate by placing lock
into slot and tighten with tool.
2
3
4
5
6a
7b
6b
7a
Connection
Bar
Slide Connection Bar
between Extrusions
and tighten Knobs
to secure.
Turn Knob Clockwise
to Tighten Lock
STAR
indicates location of connection bar
with knobs on BACKSIDE of unit.
Rear View of Display
**
Do not over tighten Knobs.
**
Knob
Knob
Graphic Attachment
Apply graphics to back
of assembled backwall.
Connection
Bar
Connection
Bar
Connection
Bar
Connection
Bar
Velcro attched to LOWER
back of extrusion bar
Velcro attched to UPPER
back of extrusion bar
GREEN STAR
indicates
location of connection
lock with knob.
A
B
B
C
5a
4a
V10
Pressure Screw
Note: V10 Detail
Slide V10 in between
grooves of extrusions
#5 and 5a.
Tighten to secure.
Pressure Screw
Example of Pressure
Screw Attachment
Note
: Extrusions 5/5a and 4/4a
must stay assembled when shipping.
