Camec AquaRV, Инструкция по эксплуатации

Страница: 9 / 30

9
“DELAY START” button
F
This button allows you to to delay the start of the cycle for up to 24 hours.
To delay the start use the following procedure:
Set the required program.
Press the “Delay Start” button once to activate it (h00 appears on the display) and
then press it again to set a 1 hour delay (h01 appears on the display); the pre-set
delay increases by 1 hour each time the button is pressed, until h24 appears on the
display, at which point pressing the button again will reset the delay start to zero.
Confirm by pressing the “START/PAUSE” button (the light on the display starts to
flash). The countdown will begin and when it has finished the program will start
automatically.
It is possible to cancel the delay start function with the following procedure:
Press and hold the button for 5 seconds until the display shows the settings for the
program selected.
At this stage it is possible to start the program previously selected by pressing the
“START/PAUSE” button or to cancel the process by setting the selector to the OFF
position and then selecting another program.
The spin cycle is very important to remove as much water as possible from the laundry
without damaging the fabrics. You can adjust the spin speed of the machine to suit your
needs.
By pressing this button, it is possible to reduce the maximum speed, and if you wish, the
spin cycle can be cancelled.
To reactivate the spin cycle you can press the button until you reach the spin speed you
would like to set.
To help protect your fabrics, it is not possible to increase the spin speed above
the speed automatically set by the wash program.
It is possible to modify the spin speed at any time without pausing the machine.
SPIN SPEED function
G