Camec AquaRV, Инструкция по эксплуатации

Страница: 26 / 30

26
IMPORTANT: DO NOT REMOVE THE FOAM ON TOP
THE CROSSPIECE.
WARNING:
DO NOT LEAVE THE PACKAGING WITHIN REACH OF
CHILDREN AS IT IS A POTENTIAL SOURCE OF DANGER.
SETUP & INSTALLATION
Remove the polystyrene base and place the machine near its permanent position.
Carefully cut through the hose retaining clip at the rear of
the appliance (diagram 1).
Unscrew the two top screws A and remove the top cover,
sliding it off horizontally (diagram 2).
Remove the cardboard protection.
Unscrew the two bolts B on the crosspiece (with 19mm
spanner) & remove the polystyrene spacer under it (diagram 3).
Please do not re-fit the bolts.
Replace the cover with the two screws A.
Please ensure when fitting the cover that the locating pins
are inserted correctly in their slots, positioned on the side
of the cabinet as shown in the diagram 4.
Lean the machine forward and remove the plastic bags
containing the two polystyrene blocks at the sides, pluuling
downwards (diagram 5).
Apply the sheet of corrugated insulation material to the
base as show in the diagram 6.
Level the machine using the front feet Turn the nut clockwise to unlock the screw adjuster.