CAME ZLX24MA Скачать руководство пользователя страница 43

Страница: 43 / 112

- Manual

FA01796-IT -

04/2022 - © CAME S.p.A. - The contents of this manual may be changed at any time and without notice. - Translation of the original instructions

PROGRAMMING

Programming button functions

ESC button

The ESC button is used to perform the operations described below.
Exit the menu
Delete the changes
Go back to the previous screen
Stop the operator

< > buttons

The <> buttons are used to perform the operations described below.
Navigate the menu
Increase or decrease values

ENTER button

The ENTER button is used to perform the operations described below.
Access menus
Conﬁ rm choice

Outside the menu, the ESC key stops the gate and the < > keys open and close the gate.

Getting started

Once the electrical connections have been made, proceed with commissioning. Only skilled and qualiﬁ ed staff may perform this operation.

Please see the full control panel manual for information on the additional functions relating to the encoder, limit switch and slowdown switches.

Make sure that there are no obstacles in the way.
Power up the device and begin programming.
With mechanical and electronic stops, follow the conﬁ guration below.

Содержание ZLX24MA

















































































































Результаты поиска

Содержание ZLX24MA

Отзывы:

CAME ZLX24MA, Руководство пользователя, Страница: 43 / 112

Результаты поиска

Содержание ZLX24MA

Отзывы: