3
p.
18
- Manual
FB
011
85
-EN
- 06
/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - This is a translation of
the original instructions
Save
Empty
Settings
Empty
Empty
Number of frames:
Home
Back
Info
19:02
Thursday
01 Feb 2018
Restore preset settings
Set slave mode
Restart application
Reboot device
Home
Back
Info
19:02
Thursday
01 Feb 2018
The factory settings require the indoor receiver to be in "slave" mode. Any indoor receivers set to "mas-
ter" mode are configured via the PCS/Xip software to match their systems structure.
C
Touch the button to set the indoor receiver to "slave" mode.
This setting is only available on the "master" indoor receivers. The changed mode requires the device to
be reconfigured.
D
Touch the button to return all the local settings to the default factory settings.
(administrator password required;
the default password is 112233).
A
Touch the button to reboot the
indoor receiver.
B
Touch the button to reboot only
the application that runs the indoor
receiver.
Maintenance
Touch each of the empty sections
and use the drop-down menu to
select the content that you want to
assign to the section.
Save the setting by touching the
Save button
.
A
B
C
D
