CAME Australia Pty Limited
Automatic Gates
– Access Control – Parking Equipment - Bollards
CAME Australia Pty Limited ABN 31 116 251 024
Unit 55, 11-21 Underwood Road, Homebush NSW 2140
T: (02) 9746 9991 F: (02) 9746 8891 W: www.came.com.au
QUICK CONTROL BOARD SETUP
BASIC SETUP.
ADD P.E.
ADD LOOP
ZBX6
1+2 2+C1 Bridged
REMOVE 2+C1
NOT AVAILABLE
ZBX74
7, 8 & 9 ON
7 OFF
2+7, DIP 3 ON
ZBK/E
7, 8, 10 ON (Block 1)
7 OFF
2+3
ZD2
8, 9 & 10 ON
9 OFF
2+7 DIP 3 ON
ZN2
8, 9 & 10 ON
9 OFF
NOT AVAILABLE
ZL90
9 & 10 (Block 1) 1 (Block 2)
10 OFF
2+7, DIP 3 ON
ZL92
MENU
MENU SETTINGS
2+7
ZL180
7 & 8 ON 1+2 Bridged
7 OFF
2+7, DIP 3 ON
ZLJ 14/24
MENU
MENU SETTINGS
2+7
ZN7
A1motor, A3 configure
F2
2+3P
--------------------------------------------------------------------------------------------------------------------------------
DUPLICATING THE TRANSMITTER (CLONING)
Your first transmitter sends a code to the receiver, after that you need to clone from a programmed
transmitter to a new transmitter.
1 – On the new transmitter, press and hold both buttons together until the LED flashes quickly (about 5 secs)
2 – Now press the button you wish to activate (the LED stays on)
3 – Within 10 seconds, place the active transmitter
to the key ring position of the new transmitter and
press the programmed button. The LED will flash 3 times to indicate memorisation
