CAME I1PB0500026, Руководство по установке

Страница: 10 / 28

10
ø3,3
90
page
10
- Manual
FA01260-IT
- 10/2018 - © CAME S.p.A. - The contents of this manual may be changed, at any time, and without notice
. - T
ranslation of the original instructions
Tighten the two grub screws supplied with the boom into the boom attacher to prevent the boom from oscillating.
Fit the support braces onto the boom for the anti-shearing protective cover.
MAGNETIC SENSOR FOR DETECTING BOOM DETACHMENT (OPTIONAL)
W hen applying the magnetic sensor, proceed as follows:
- run the micro-switch cable through the motor shaft hole and fasten the micro-switch to the boom attachment

;
- fasten the boom to the attachment

;
- drill a hole in the boom following the measurements shown for fastening the magnet

;
- connect the magnetic sensor to terminals IN1 and COM (see INPUT CONTACTS ON THE IO-RS485 CONTROL PANEL).