Page
3
- Manual
FA01031-IT
- 08/2019 - © C
AME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - T
ranslation of the
original instructions
Page
3
- Manual
FA01404-EN
- 10/2019 - © C
AME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - T
ranslation of the
original instructions
Page
3
- Manual
FA01404-EN
- 10/2019 - © C
AME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Original instructio
ns
CONFIGURING THE MODULE
Accessing configuration mode
Press and hold the
buttons at the same time until the password entry screen shown
in fi gure
appears (default password 1234).
Use the
buttons to enter the fi rst of the four numbers that make up your password.
Press to confi rm and move on to the next number.
Once you have entered the correct password, you can access the dedicated module con-
fi guration section
.
Use the
buttons to scroll through the various parameters to confi gure. Press to
access the confi guration options.
0 _ _ _
Confi guration
Language
Information
Display
Information
Version
ID
BACK
Information
Version
ID
BACK
Language
Italiano
English
Français
Version
1.00.001 - 1.05
1.00.000
1.00.003 - 1.08
ID
SN: 123456
IP: 192.168.12.1
255.255.255.255
[Language]
Scroll through the list of available languages
using the
buttons. Press to choose
the one you require and go back to the previ-
ous menu.
Select and press to go back to the pre-
vious menu without changing the existing pro-
gramming.
[Information]
The menu provides technical information re-
garding the display module and the other mod-
ules installed on the entry panel.
[Version]
The
buttons allow you to scroll through
the list and view the fi rmware version of the
modules installed on the entry panel.
Key to symbols
audio or audio/video
pushbutton panel
display
keypad
RFID
info
Select and press to go back to the pre-
vious menu.
[ID]
The information contained in this menu refers
to the audio or audio/video module installed on
the entry panel.
SN: identifi cation code (also found on the back
of the module),
IP: IP address of the module and subnet mask
(information only found on IP modules).
Select and press to go back to the pre-
vious menu.