3
2
1
Page
2
- Manual
FA01031-IT
- 08/2019 - © C
AME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - T
ranslation of the
original instructions
Page
2
- Manual
FA01404-EN
- 10/2019 - © C
AME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - T
ranslation of the
original instructions
Page
2
- Manual
FA01404-EN
- 10/2019 - © C
AME S.p.A. - The contents of this manual may be changed, at any time, and without notice. - Original instructio
ns
General precautions
•
Read the instructions carefully before beginning the installation and carry out the actions as specifi ed by the manufacturer.
•
The installation, programming, commissioning and maintenance of the product must only be carried out by qualifi ed technicians,
properly trained in compliance with the regulations in force, including health and safety measures and the disposal of packaging.
•
Before carrying out any cleaning or maintenance operation, disconnect the device from the power supply.
•
The equipment must be destined solely for the use for which it was expressly designed.
•
The manufacturer declines all liability for any damage as a result of improper, incorrect or unreasonable use.
•
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1 - This device may not cause harmful interference.
2 - This device must accept any interference received, including interference that may cause undesired operation.
DESCRIPTION
Display module connected and powered via BUS.
Module assembly or removal must take place while the entry panel is not powered.
❶
Display
2
Navigation buttons
3
Outlets for connection to other modules
Technical data
Type
MTMDY
Power supply (V DC)
10.7 to 18
MAX current draw (mA)
250
MIN current draw (mA)
55
Storage temperature (°C)
-25 to +70
Operating temperature (°C)
-25 to +55
Protection rating (IP)
54