CAME 8K01MI-0503 FROG KIT, Быстрая настройка

Страница: 6 / 32

5 MANUAL RELEASE
To manually release the gates:
1. Lift tab.
2. Insert DIN key, traiangular key or lever into the
lock and turn 90 to release
A1
.
3. The gate should should now be manually
released. With your other hand firmly open the
gate. Now fully open the gate carefully at the
same speed as the automatic operator
A2
.
4. To re-engage, close the gate and turn the
key back to its original position. Attempt to
manually move the gate to ensure it is fully
engaged
B
.
5. Please note , it may be necessay to operate
the motor once power is restored to fully
engage the system. Please take care when
operating the system in this manner.
The FROG underground system is supplied with one of three release mechanisms; a
triangular key system
01
, a DIN key system
02
or a lever system
03
.
Basic Maintenance: Hints & Tips
• Lift manual release tabs & spray the locks on both
sides with suitable penetrating lubricant.
• Spray into the lock at the connection point (brass
part) with suitable penetrating lubricant.
• Lubricate gate hinges.
• Manually release the gates at least once per month.
ALWAYS isolate the power supply as
instructed by your installer (even in a
power cut).
Release any additional locking
device fitted to the gate (eg. electric
lock etc).
a
B
01 02
03