20
-
FA01688M4A
- 05/2022 - © CAME S.p.A. - -
D
Connecting a single operator
E
Connecting several operators
If necessary, insert the RSE card and set a peripheral number for each card (see the [F56 Peripheral Number] function in
the operator or control panel manual).
All the operators connected to the module must have their Baud rate set to 38400 (see the [F63 RSE Speed] function in
the operator or control panel manual).
The module compatibility table is available at the following address: http://www.cameconnect.net/came/docs/
cameconnect_compliant_devices.html
F
Connecting non-CRP operators
Using the relay outputs you can control up to 2 operators with CAMEConnect.
C
Confi guration
Before confi guring, make sure that the module is disconnected from the mains power and that the PIN code for the SIM
card is disabled.
The SIM card (not included) must be enabled for 2G data traffi
c and for sending and receiving SMSs. Check costs and
availability with your local mobile telephone provider.
Data consumption depends on the number and type of devices associated with the module, and how they are used with
the CAMEConnect system.
1
Note down the SIM card number, remove the shell and insert the SIM card into the relevant slot.
2
Replace the shell and power up the module.