ENGLISH
P.
1010
-
M
an
u
al
c
od
e:
31
9
U
3
6
31
9
U
3
6
ve
r.
1.
0
1.
0
05
/2
0
11
© C
A
M
E c
an
ce
lli auto
m
ati
ci
s.p.a. - T
h
e d
ata a
n
d i
nf
or
m
ati
on
in
th
is
m
an
u
al
m
ay b
e c
h
an
g
ed at a
ny tim
e a
n
d w
ith
ou
t o
b
lig
ati
on
o
n th
e p
art of C
am
e C
an
ce
lli A
uto
m
ati
ci
S
.p.a. to n
otify s
ai
d c
h
an
g
es.
7 Selecting functions
1 ON -
Automatic closing - The automatic closing timer activates at the closing endpoint. The pre-set time is adjustable, but it's in any
case subject to any safety device intervention and does not activate after a total "stop" or in case of power failure.
2 OFF -
"Open-stop-close-stop" function with (2-7) button and transmitter.
2 ON -
"Open-close" function with (2-7) function and transmitter.
3 ON -
"Open only" function with transmitter.
4 ON -
Opening and closing prefl ashing - After either an opening or closing command, the fl ashing light connected on 10-E, fl ashes
for 5 seconds before beginning to execute the command.
5 ON -
Obstacle detection - With motor idle (door-leaf closed, open or after a total stop command), it prevents any movement if the
safety devices (e.g. photocells) detect an obstacle.
6 ON -
Maintained action - Door opens and closes only if button is kept pressed.
7 ON -
Ramming function activated - At each opening command, the door presses against the strike plate for one second, facilitating
the release operation for the electro lock connected on terminals 11-S.
8 OFF -
Partial stop - Door stops is in movement which consequently triggers automatic closing, insert the safety device on terminal
(2-C3);if unused, set DIP switch to ON.
9 OFF -
Total stop - This function stops the door and then excludes any automatic closing cycle; use either the buttons or transmitter to
resume movement. Insert safety device on [1-C2]; if unused, set DIP switch to ON.
10 OFF - Reopening during closing - The photocells, detect an obstacle during the closing phase of the door leaf, triggering an inversion
of travel direction, until door is fully open; Insert the safety device on terminal (2-C1); if unused, set DIP switch to ON.
1 - Must stay OFF
2 - Must stay OFF
3 ON - Activates the safety tests to check photocell effi
ciency.
4 - Unused
10-WAY DIP-SWITCH
4-WAY DIP-SWITCH
DIP
POS
.
F
UNCTION
ACTIVATED
