CAME-TV WAERO, Руководство пользователя

Страница: 5 / 24

4
Then following steps should be proceed on the
premise of that the led on the remote headset
become solid after powered on. On the remote
headset, press and hold on both & -
buttons simultaneously until the Blue LED starts
flashing quickly. The slowly flash on the remote
headset indicates the process is completed. The
same procedure goes for other headsets for pairing.
Each master headset can be paired with 3 different
remote headsets. (If an hub is needed, it is regarded
as one of the remote headsets.) The master headset
will quit the pairing process and LED become solid
after three different remote headsets had been
paired with the master
Quit pairing mode by taping power button on master
if remote headset(s) is/are less than 3 pieces.