1
2
3
4
5
7
6
photos or videos. Camera brands included: Canon / Sony / Panasonic.
6.
DISPLAY
Set screen direction:
NORMAL: displayed in the forward direction;
REVERSE: displayed in reverse.
7.
DEFAULT
restores default settings:
For normal use, it need to be reset and calibrated after all settings are restored.
8.
ABOUT
Emitter :controller firmware version number;
Receiver: focus motor firmware version number.
Four: Focus Motor
1.
Output gear
: adjust the lens’ focus, aperture, zoom by engaging with the lens focus ring.
2.
Assemble fasteners
: install the follower motor to the appropriate bracket.
3.
Frequency auto matching button
: When it cannot be connected because communication channel does not
match. Press this button to pair connection automatically.
4.
Antenna:
2.4GHz/2dbi.
5.
Power input interface
: use 0B series P06 6-core aviation socket, input power supply DC12-18V/1.5A, When
the power is connected, the motor will open automatically, and will wait for connection with the controller.
6.
Status indicator:
When it is disconnected, the blue light flashes.
When connected successfully, the green light always on.
When the input voltage lower than 12V, the red light flashes.
7.
Camera control interface
: The interface type is MiniUSB-10P, it can be
connected to the controlled camera for remote control with a dedicated camera control cable.
1.
Output gear
2.
Assemble fasteners
3.
Frequency auto matching
button
4.
Antenna
5.
Power input interface
6.
Status indicator
7.
Camera control interface