1
2
Page
12
- Manual
FB01264 -EN
- 12/2018 - © C
AME S.p.A. - The cont
ents of this manual may be changed, at any time, and without notice. - T
ranslation of the original instructions
Ethernet connection configuration
Home
Home
Back
Back
Info
Info
19:02
Thursday
01 Feb 2018
19:02
Thursday
01 Feb 2018
Enabled
Enabled
Ethernet
DHCP
Save
Save
Configure WiFi
Configure Ethernet
Disabled
Disabled
WiFi
Static
MAC address
Gateway
Netmask
IP address
Mode
Ethernet
DNS
Default gateway
Wireless
Ethernet
Type of connection
This section is used to determine
how the device connects to the
network.
A
Enable/disable the desired con-
nection types
B
Indicate whether the connection
to the gateway take place over the
Ethernet network or through Wi-Fi.
C
Enter a valid DNS address to
have the CAMEConnect connection
(for example, 8.8.8.8.).
D
Lets you choose the type of address from:
DHCP
The device's IP address is assigned by the DHCP server; if there are no special needs, this mode lets you
continue with the settings without adding any additional data.
Static
The device's IP address is manually assigned.
E
If you have chosen a static IP address, enter the device's IP, which must belong to the same subnet as that of
the router and of the other connected devices.
F
If the netmask is different from the default one, provide the proper netmask.
G
Provide the default gateway for your network.
If a DHCP server is also present, the static address selected must not be among those included in the
DHCP pool.
For devices configured as a Master it is advisable to assign a static IP address. Instead if the address is
generated by a DHCP server, check that the IP address is assigned on the basis of the MAC ADDRESS of the
device or that the lease time is very high.
Network
D
E
F
G
A
B
C
