B
9
7
5
3
1
10
8
6
4
2
10
8
6
4
p.
3
- M
an
ua
l
FB
010
03
-E
N
v.
1
- 1
1/
20
17
- © C
am
e S
.p
.A
. - T
he c
on
te
nt
s o
f t
hi
s m
an
ua
l m
ay b
e c
ha
ng
ed
, a
t a
ny t
im
e, a
nd w
ith
ou
t n
ot
ic
e.
Call the telephone numbers associated with group 6.
Call the first number in group 6, if there is no answer,
call the second number in group 6, if there is no answer, etc.
Call the telephone numbers associated with group 4.
Call the first number in group 4, if there is no answer,
call the second number in group 4, if there is no answer, etc.
Checking connection to GSM network status
Press and hold down the PROG button; the LED above the button provides
the following signals:
Flashing quickly (< 2 seconds) = Module not registered with network
Flashing slowly (> 2 seconds) = Module registered with network
COMMISSIONING THE DEVICE
Preliminary operations
The micro-SIM card (not included) must be enabled for 2G data traffic and for sending and receiving SMS messages. Check
with your local mobile telephone carrier for availability and costs for such services.
Note: Make sure that module MTMAGSM has no power and that the SIM card's PIN code has been disabled.
Before fitting the micro-SIM card into module MTMAGSM, it is advisable to test the sending and receiving of SMS messages by
using the micro-SIM on a normal mobile phone, in the proximity of the area in which you intend to install the device.
Starting up the module
Fit the micro-SIM card into its housing as shown in the installation instructions.
Connect the external aerial to the module socket and power the system.
During start-up all the call button LEDs flash at the same time; calls cannot be made during this stage. The module is ready for
optimum operation only once registration has been completed, and where there is a good GSM signal.
• The maximum 1,000 telephone numbers in the contacts list can be authorized to control an on-board relay and/or be associa-
ted with call buttons; for example, you can call the module from a number - that has the required authorizations - to open the
electric lock or the entry panel's on-board relay.
• The MTMAGSM module paired with the MTMKB module, provides you with up to 2,000 codes for managing door-opening and
relay activations. Also, a customized call code can be associated with each group.
