Camco Vortex 2.6, Руководство пользователя

Страница: 11 / 32

CAMCO USER MANUAL
VORTEX POWER AMP SERIES
P.11
3.1 On/off Switch
The On/Off Switch does not isolate the appliance from mains.
It initiates start-up by activating the phase-angle control (the inrush current
limiter). When the amp is connected to mains, only the line-filter (un-fused) and
the input of the phase-angle control (fused) are energised.
3.2 Precautions
When mounting or connecting the amp always disconnect it from mains.
3.3 Mounting
Use four screws and washers when mounting the amplifier to the front rack
rails. Rear support is also recommended, especially in mobile and touring use.
Rear rack mounting ear kits are available from
CAMCO’s technical services
department or by special order from your dealer or distributor.
3.0 INST
ALL
ATION