Camco HEAVY DUTY SERIES INDEX DRIVES 1150E, Руководство по обслуживанию

Страница: 4 / 27

3
SPARE PARTS KIT:
CAMCO offers a spare parts kit for all CAMCO index drive models manufactured by CAMCO. The spare parts kit for
CAMCO’s Heavy Duty "E" Series Index Drive includes input oil seals, input bearings, and input shims. Cam followers
are not included in the spare parts kit. CAMCO recommends a spare parts kit and cam followers be purchased and
kept on hand prior to any disassembly of your CAMCO E-Series Index Drive.
BEFORE STARTING:
CAMCO uses either Red Perma-Lok
®
‚ #HM118 or Green Perma-Lok
®
‚ #HM160 to secure most screws and set screws.
Exceptions are removable covers, etc. If you encounter a fastener that is difficult to remove, apply heat to the screw
and remove while still warm.
CAUTION
Localized heat can distort the part. Do not overheat any item.
WARNING
Disassembly and repair of a CAMCO Heavy Duty "E" Series Index Drive requires lifting and manipulating large cumber-
some parts. Use the following table with approximate weights as a guide in selecting hoist, etc.
APPROXIMATE COMPONENT PART WEIGHT:
Index Drive Input Shaft (lbs) Cam (lbs) Follower Wheel Output Bearing
950E 205.0 400.0 720.0 250.0
1150E 335.0 800.0 1200.0 325.0
1550E 600.0 1350.0 2665.0 1200.0
2050E 915.0 3950.0 4950.0 1265.0
CAUTION
Disassembly and repair of a CAMCO Heavy Duty "E" Series Index Drive requires special tools not normally available. A
partial list of commercially available tools is provided. Some special tools and equipment must be manufactured by
maintenance personnel on site. Using the proper tool is mandatory for successfully completing repairs.
SPECIAL TOOLS:
Repair of any CAMCO Heavy Duty "E" Series Index Drive requires the following special tools,
1. Air Impact Wrench, 1" Drive, 2000 ft-lbs
2. Torque Wrench, 1" Drive, 2000 ft-lbs
3. Large Styrofoam container (Igloo‚ 50 or 60 gallon Ice Chest) three-quarters filled with dry ice.
The following special tools are unique to the individual "E" Series Index Drive.
Index Drive Input Lock Nuts Cam Follower Screws
950E Spanner Wrench PN22 (H80 Flw.) 10MM Hex Socket, 1" Drive
(H96 Flw.) 14MM Hex Socket, 1" Drive
1150E Spanner Wrench PN28 (H128 Flw.) 17MM Hex Socket, 1" Drive
1550E Spanner Wrench PN36 (H128 Flw.) 17MM Hex Socket, 1" Drive
(H160 Flw.) 19MM Hex Socket, 1" Drive
2050E Spanner Wrench PN36 (H192 Flw.) 22MM Hex Socket, 1" Drive