2
I. Part List
Only Applies to CVC72 and CVC724.
1.
One drawer.
2.
One menu board.
Applies to CVC55, CVC72 and CVC724.
3.
Umbrella.
1.
3.
2.
II. Assembly Instructions
A. VINYL UMBRELLA
Before opening the umbrella, turn it
upside down and shake out all of the folds.
When packed at the factory, your umbrella was specially folded and rolled to insure against
freight damage. "Shake out" is required for first use only.
To Place Umbrella on Cart (Applies to CVC72 and CVC724):
1. Let umbrella pole slowly drop onto center support pole until
button snaps into locations hole.
To Place Umbrella on Cart (Applies to CVC55):
1. Lower umbrella pole through mount hole onto aluminum locator mount.
To Remove Umbrella:
1. Depress the retractable button on the umbrella pole.
2. Twist the umbrella pole 1/4 turn to disengage the button.
3. From front of cart reach up the umbrella pole and depress
the umbrella latch to lower the umbrella.
4. When the umbrella is lowered, lift the umbrella
pole out of the base pole.
To Store:
1. Umbrella should be clean and dry.
Operators Side
CVC55 Cart
Shown with optional
Retainer Strap (730STP)
Mount Hole
Aluminum
Pole Locator
Aluminum
Pole Locator
Umbrella
CVC72 and CVC724 Carts
Umbrella
Support Pole
Mount Hole
