ThunderSync3-C10
Page 24 of 41
5.5.6 Command Line Instructions (CLI)
Command Line Instructions can be used to control and monitor the functions of the hub and
attached devices. To use the command-line interface a serial terminal emulator must be installed on
the host computer. Examples include PuTTy, Serial, ZTerm, and Minicom. If you would like more
information, please look at our more in-depth information here:
Two example commands can be seen below, you can use these commands to check hub information
and health.
Command
Action
system
Show hardware and firmware information
health
Show voltages, temperatures, errors and boot flag
