SP54
पृष
14
का
31
जीएच
:0.1. Manage Ports & Your SP54
Each port on your SP54 can be managed either individually or all together. You can turn the
ports off and on, change the port mode or change the charging profiles. This can be done either
through LiveViewer or by connecting to the hub via the API.
जीएच
:0.1.1 Port Modes
Sync
Turn specific ports or the whole hub to sync mode (data and power
channels open)
Off
Turn specific ports on or off or switch the whole hub on or off. (no
power and no data channels open)
जीएच
:0.1.2 Charging Profiles
To ensure attached devices charge at their optimum rate, our smart USB hubs come with the
below intelligent charging profiles built in:
जीएच
:0.0.1 LiveViewer
LiveViewer is an Application that can be downloaded from
www.cambrionix.com/products/liveviewer
. Once downloaded and installed on the host
computer, LiveViewer allows you to switch the ports on and off, set the port to charge only, or
to sync mode. LiveViewer’s home page shows the following information about all the ports:
• Status (attached/disconnected)
• Mode (Charge/Sync/Off)
• Profile (Charging profile)
• Duration (how long the device has been attached)
• End time (time the battery reaches a threshold (full) level)
• Current (instantaneous charge current in mA)
• Energy (present energy rate)
Tick boxes adjacent to each port symbol allow that port mode to be changed. When the port is
in Sync mode, only instantaneous current can be monitored through LiveViewer. When the port
is in Charge mode, the charge profile, instantaneous current, energy rate, duration of charge
and end time are displayed. In addition to individual port information and control, LiveViewer