SP54
पृष
11
का
31
जीएच
:1. Using your SP54
In this section you can find information information on how to use your hub in a charge only or
a charge and sync application. You can also find information on managing your hub and
changing port modes, connecting multiple hubs to one host and using Cambrionix Software.
जीएच
:0.1. Using without connecting to host
When the Hub is switched on and is not connected to a local host computer it is
automatically configured to charge devices using its intelligent charging algorithm. Simply
connect the devices to be charged to any of the available ports (not the Host Port) using
USB - compliant cables.
Once the devices are connected, the algorithm will detect the highest charge rate allowable for
each attached device. Charging at the optimum rate (up to 0.5
एक
) specified by the
manufacturer will commence once profiling is complete. Depending on the state of charge of
the device attached, this may take tens of seconds.
SyncPad54
के किए एक ह्स क् पारंकभक िाकजजग ह्ने से पहिे हब से कनेक करने की आवशकषा
ह्गी
,
एक बार हब के िािू ह्ने और ििने के बार आपक् कनेकेड ह्स की आवशकषा नही ं ह्गी जब
षक कक आप हब क् पावर नही ं रेषे
,
कजस मसथकष िे ह्स क् कनेक करने की आवशकषा ह्गी पारंकभक
दमक ऊपरि
जीएच
:0.1. Using when connected to host
जीएच
:0.1.1 Connecting the Hub to a host computer
Connect the SP54 to your host system using a
बूएसबी
2.0
टाइप
-
बी
cable. Using an incorrect host
cable may result in the hub and all subsequent ports not being recognised by your host.
जीएच
:0.1.2 Charging
When the Host Port is connected to a local computer, the hub defaults to Sync mode and
charge currents are determined according to USB Implementers Forum (USBIF) Super-Speed
USB3 specifications. If the attached device complies with USB-IF Battery Charging
specification BC1.2 and supports Charging Downstream Port (CDP), the hub can provide