12
How to use the adhesives
We have provided you with 40 adhesive patches to use. The adhesives provided are 3M™
products that are specially designed for continuous use. This will allow you to wear the
DuoFertility sensor continuously and record good quality data so that DuoFertility can
indicate your fertility accurately.
How to wear the adhesive
The adhesives are sticky on both sides. To use the adhesive, remove the white, non-
shiny liner (10) and place the sensor on the adhesive (11) so that the side of the sensor
that should be against your skin is stuck to the adhesive. Next, remove the transparent
liner (13) and stick the adhesive, together with the sensor, to your body (14). It is
important that your skin is healthy and not irritated.
How to change the adhesive
After removing the adhesive, we recommend that you leave the sensor off for a few
hours, making sure that you replace it before you go to sleep. This allows your skin
to breathe and reduces the risk of skin irritation.
What to do if you experience skin irritation
If you experience skin irritation, please contact us.
We would recommend the following to help:
•
Remove the sensor when you are in the shower, and only replace it in the evening
before going to bed
•
Ensure that you have no deodorant/moisturiser where the sensor is
Prolonged skin irritation may affect your temperature readings, so it is important
to alleviate any causes of skin irritation. If the irritation persists, please discontinue
use and contact your doctor.
Содержание DuoFertility
Страница 11: ...7 Figure 2 Phases of the menstrual cycle ...