Cambridge SoundWorks SoundWorks i525, Руководство пользователя

Страница: 3 / 24

Additional Safety Advice
1) Keep surrounding objects at least four inches away
from the apparatus for adequate ventilation.
2) Ventilation openings on the apparatus should not
be impeded by such items as newspaper, cloths,
curtains, and the like.
3) Do not place naked flame sources near the appara-
tus, such as lighted candles.
4) Dispose of the battery in accordance with local
safety regulations.
5) Do not operate the apparatus at a temperature less
than 36˚ F/ 2˚ C or greater than 100˚ F/38˚ C.
CAUTION
• DO NOT REMOVE THE EXTERNAL ENCLOSURE PARTS
TO EXPOSE THE ELECTRONICS. NO USER SERVICE-
ABLE PARTS ARE INSIDE.
• IF YOU ARE EXPERIENCING PROBLEMS WITH THIS
PRODUCT, CONTACT CREATIVE LABS NORTH
AMERICA OR CREATIVE LABS EUROPE FOR A SERV-
ICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT
HAS BEEN REPAIRED.
For CANADA
AC POWER CORD CONNECTION
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
Pour le CANADA
CORDE DE CONNEXION CA
ATTENTION:
POUR EVITER LES CHOCS ELECTRICQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSET JUSQU’AU
FOND.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
FCC STATEMENT FOR THE U. S. A. This equipment has
been tested and found to comply with the limits of part
15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instruction, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by tuning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Reorient or relocate the equipment and/or
the receiving antenna.
• Increase the separation between the equip-
ment and receiver.
• Connect the equipment to an AC outlet of a
different mains circuit from the mains circuit/
outlet providing power to the receiver.
• Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
Changes or modifications to this equipment not ex-
pressly approved by Creative Labs or Cambridge Sound-
Works for compliance will void the user’s warranty.