9
Remove remaining paper strip.
The volume control contains the
power on/off switch and an LED
power indicator, as well as the
master volume control. Connect
the volume control to the
subwoofer (see diagram B on
page 7). This control can be
mounted on the side of your
computer monitor or other
surface using the mounting strip
provided. The enclosed mounting
The Volume Control
strip holds well but can be peeled
off gently. Be sure that the
mounting surface is smooth and
clean.
Remove protective paper from one
side to reveal adhesive.
1
Press exposed adhesive side firmly
against back of volume control.
3
Press volume control firmly against
mounting surface.
4
The speaker system uses an
external 15-volt DC power supply.
Insert the small DC connector
into the “15V DC IN” receptacle
on the subwoofer (see diagram
D). Insert the power supply’s AC
plug into the appropriate
receptacle.
Power Connection
Please note that the type of
adapter varies according to
country.
Caution:
To prevent
electric shock do not use a
polarized plug with an extension
cord, receptacle, or other outlet
unless the blades can be fully
inserted to prevent blade
exposure.
2
D
SWDrev.fm Page 9 Tuesday, October 17, 2000 2:03 PM
