33
33
33
33
SPDIF IN
: Leave off (default) for normal operation. Set
to ON to send external SPDIF sources through the
processor in lieu of the internal DVD player source.
The AVS500 allows you to associate the SPDIF input
with any of the external A/ V sources regardless of the
setting in this menu. Therefore there should be no rea-
son to change this.
Dual Mono:
The normal setting is STEREO.
•
L-MONO
– sends only the left channel signal to
both Left and Right output channels.
•
R-MONO
– sends only the right channel output to
both channels. These two selections are useful for
some VCDs which may have one language on
each channel in Mono.
•
MIX-MONO
– mixes both left and right channels,
sending the resulting mono mix to both output
channels. Use this when you are using a mono
speaker/amplifier system, or older TV with a single
speaker.
Dynamic:
Controls the amount of dynamic range com-
pression from FULL compression to no compression
(OFF). You may freely adjust this to your taste. FULL
compression is useful for low-powered speaker sys-
tems, or for low-level listening. This can be helpful for
listening at reduced levels at night to avoid disturbing
others. With FULL compression low-level dialogue
becomes louder, and loud passages are quieter.
Turning the compression OFF will give the most realis-
tic dynamic range with wide contrast between the
loudest scenes and the quietest ones. This provides
the full impact of the soundtrack. The default is OFF.
Pro Logic:
Sets your preference for Pro Logic decod-
ing of DVDs or external digital (SPDIF) sources.
•
AUTO (default)
– Material containing a Dolby
Digital 2.0 or 2.1 soundtrack will play back in
Stereo unless flagged in the bitstream for Dolby Pro
Logic. CDs and MP3s will play back in Pro Logic.
•
ON
– Dolby Digital 2.0 or 2.1 source material will
play back in Pro Logic mode regardless of how it
is flagged.
•
OFF
– All non-5.1 source material will play back
in Stereo.
Note: Dolby Digital 5.1 or DTS soundtracks will take
precedence over the settings in this menu and play back
in their proper format. Also, when making a stereo
recording of a disc source from one of the AVS500’s
A / V outputs, set Pro Logic OFF.
LPCM output:
Lets you set the optical digital output
sampling rate to 48kHz (default) or 96kHz.
Содержание MegaTheater AVS500
Страница 1: ...D V D P L A Y E R T U N E R P R E A M P L I F I E R U S E R M A N U A L...
Страница 5: ...5...
Страница 39: ...38...
Страница 40: ......