Cambridge SoundWorks MegaTheater AVS500, Руководство пользователя

Страница: 17 / 41

17 17
Connecting Auxiliary A/V Sources:
There are three auxiliary A/V connections available on
the AVS500 (AV1, AV2, and AV3). These are all electri-
cally identical, and may be used interchangeably. Each
connection has stereo audio and Composite video
inputs and outputs. AV1 and AV2 are located on the rear
panel and may be used to connect a VCR, Cable Box
or similar device. AV3 is behind the door on the front
panel to provide convenient temporary connection of a
camcorder or portable music recorder/player.
You must connect the AVS500 Composite Video output
to your TV’s Composite Video input to view video feed to
any of the three A/ V inputs.
Connecting an Auxiliary A/V Source
with Digital Output:
Many digital cable systems and almost all Digital Satellite
receivers offer digital audio outputs. This provides access
to the Dolby Digital (AC3) signal from movies and high
definition TV broadcasts. You may also connect any
audio source or PC sound card which provides a stan-
dard SPDIF (Sony Philips Digital Interface) signal with up
to 24 bit/96Khz resolution. Connect a standard TOSLINK
optical cable to the Digital input as shown in the diagram.
The AVS500 will decode Dolby Digital, DTS, Dolby Pro
Logic or Stereo from the digital signal as selected in the
Audio Setup menu. This digital input may be associated
with the video signal from AV1, AV2 or AV3 by pressing
the “SPDIF” key on the remote after the desired A/V input
is selected.
Note: The A/V input must be in STEREO mode to allow
SPDIF selection.