i
Notice for the USA
FCC Part 15: This equipment has been tested and
found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, this notice is not a guarantee that
interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off and
on, the user is encouraged to try one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the distance between the equipment
and receiver.
•
Connect the equipment to an outlet on a
circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced
radio/ TV technician.
CAUTION: To comply with the limits for the Class
B digital device, pursuant to Part 15 of the FCC
Rules, this device must be installed with computer
equipment certified to comply with the Class B
limits.
All cables used to connect the computer and peripherals
must be shielded and grounded. Operation with non-
certified computers or non- shielded cables may result in
interference to radio or television reception.
Modifications
Any changes or modifications not expressly approved
by the grantee of this device could void the user’s
authority to operate the device.
Notice for Canada
This apparatus complies with the Class B limits for
radio interference as specified in the Canadian
Department of Communications Radio Interference
Regulations.
Cet appareil est conforme aux normes de CLASSE “B”
d’interference radio tel que spe’cifie’ par le Ministère
Canadien des Communications dans les règlements
d’interfèrence radio.
Declaration of Conformity
According to the FCC96 208 and ET95-19
Name:
Creative Labs Inc.
Address:
1901 McCarthy Boulevard
Milpitas, CA. 95035
United States
Tel: (408) 428-6600
declares under its sole responsibility that the product
Trade Name:
Creative Labs/
Cambridge SoundWorks
Model Number:
CSW3500
has been tested according to the FCC / CISPR22/85
requirement for Class B devices and found compliant
with the following standards:
EMI/ EMC: ANSI C63.4 1992, FCC Part 15 Subpart B
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference,
and
2. This device must accept any interference received,
including interference that may cause undesirable
operation.
Ce matériel est conforme à la section 15 des régles
FCC. Son fonctionnement est soumis aux deux
conditions suivantes:
1. Le matériel ne peut étre source d’interférences et
2. Doit accepter toutes les interférences reques, Y
compris celles pouvant provoquer un
fonctionnement indésirable.
Compliance Manager
Creative Labs, Inc.
March 4, 1999
Safety & Regulatory Information
The following sections contain notices for various countries:
WARNING: To prevent fire
or shock hazard, do not
expose this appliance to
rain or moisture.
Important Notice
The serial number for the DTT2500 Digital is
located on the Decoder Amplifier. Please write this
number down and keep it in a secure area. This is for
your security.
Compliance
This product conforms to the following Council Directive:
•
Directive 89/ 336/ EEC, 92/ 31/ EEC (EMC),
73/23/EEC (LVD)
