BOLDscreen 32 AVI : Getting Started
7
32 through a head-coil mirror. The image on the clone monitor (HDMI output) will not
be affected.
7)
If required, switch between inputs by pressing the appropriate input select button.
Again, there may be a delay while the BOLDscreen switches modes.
8)
Press the power button once to place the BOLDscreen 32 in a low-power mode. This
mode turns off the BOLDscreen 32 LED backlight so that no picture can be seen. The
power indicator will change to blinking.
9)
To restore the image on the BOLDscreen 32, press the power button once to restore
video to the BOLDscreen32.
10)
To place the AVI box in low-power mode, first place the BOLDscreen 32 in low-power
mode as in step 8, then press and hold the power button for three seconds. The power
indicator will change to slowly pulsing.
Note: If an input source stops sending video, for example because it is powered off or goes into
sleep mode, then the AVI box will stop sending video. When the source begins sending video, the
AVI box will not output video to the BOLDscreen 32 automatically. Press the corresponding
input select button to restore video.
Power states and button functions summary
AVI box state
BOLDscreen32
state
Clone
monitor
state
Short press
Long press
(~3s)
Low power (power
indicator pulsing
slowly)
Low power
No video
N/A
AVI box->
Sending
video
Sending video
(power LED
blinking, one input
LED on)
Low power
Displaying
video
BOLDscreen32 ->
Displaying video
AVI box->
Low power
Sending video (LED
solid on, one input
LED on)
Displaying video
Displaying
video
BOLDscreen32 ->
Low power
N/A
