BOLDscreen 32 AVI : Getting Started
4
Parts List
BOLDscreen32 AVI
—
Video input switching box.
Getting Started Guide
—
Printed version of this document.
SD Card
—
If you purchased your AVI to work with your existing BOLDscreen32, you will have
received a replacement San Disk 4 GB or 8GB SD/SDHC card or similar. This contains a firmware
upgrade for your BOLDscreen 32 that will enable the remote control features.
Power Supply Unit
—
IEC320-C14 input connector. 60 W, 24 V DC output. 1 m attached cable
terminates in barrel connector.
Power Cord
—
2 m IEC320-C13 power cord. Terminates in region-specific plug.
Hardware Requirements
A variety of inputs are supported. For example:
•
A computer running Windows XP SP3 or later (ideally Windows 10), Mac OS X 10.11 (El
Capitan) or later, or a Linux distribution like Ubuntu 16.04 or later. The computer must
have a HDMI (via an adapter if necessary) or DisplayPort output.
•
A Blu-ray Disc player or DVD player with HDMI output.
•
A streaming media device with HDMI output.
Optionally, a second monitor can be connected to monitor the BOLDscreen 32 image from the
control room. The rear of the AVI has a clone HDMI output for this purpose. This clone output is
identical to the fibre output and produces video at 1920x1080 @ 120Hz. We have tested the
clone HDMI output with 24” ViewSonic XG2401 and XG2402 LCD monitors –
other desktop LCD
monitors should work too if they can support 1920x1080 @ 120Hz via HDMI.
