ITH-Series Technical Manual
Page 12
Cambridge
Engineering
Inc.
Installation
Figure 5: Suspension Mechanism
Install the tube and reflector support hanger on the chain with “S-hooks” (Figure 5 & Figure 6).
Figure 6: Hanging Points
Place the first
(flanged, aluminized)
tube in the first two hangers (Figure 7). Be sure the flange is
toward the intended burner location. The other end of the tube should have the first coupling
already loosely fitted.
Concrete Beam
Turnbuckle
Beam Clamp
24"
Min.
3/8"
Threaded
Rod
I-Beam
I-Beam
12"
Min.
Anchor
"S" Hook
Note:
Close all "S" Hooks,
Turnbuckles, "J" Bolts.
12"
Min.
Truss
Eye Bolt
8' to 9'
10'
10'
Burner
Side
"First Hanger"
Venting
Side
"Last Hanger"
Close all open ended
"S" hooks and
turnbuckles