Rear panel connections
Power AC
A1
A2
Ethernet
USB
Audio In
D2
D1
Sub Out
HD/Local media
BT100
WiFi Dongle
Loudspeaker Terminals
Right
Left
4-8 Ω
www.cambridge-audio.com
Rated Power Consumption:
300W
Designed and engineered in London, England
Minx Xi
Digital Music System
R
L
R
L
Digital Inputs
1
Mains Voltage Selector Switch
Switches the mains voltage between 220–230V and 100–120V use.
Note: Intended for use by a professional installer or Cambridge Audio retailer only.
2
AC power socket
Once you have completed all connections to the amplifier, plug the AC power cable
into an appropriate mains socket then switch on. Your Minx Xi is now ready for use.
3
Wireless antenna
Should be in the upright position as shown. Allows connection to 802.11b/g or n
networks (2.4 GHz will only be used for n networks).
4
Speaker terminals
Connect the wires from your left channel loudspeaker to the Left + & - terminals,
and the wires from the right channel loudspeaker to the Right + & - terminals.
Care should be taken to ensure no stray strands of wire short the speaker outputs
together. Please ensure that your speaker wires are properly inserted to provide a
good electrical connection. It is possible for the sound quality to be affected if the
connections are loose.
5
HD/Local media
Use to connect a USB storage device or another portable device that is USB HD/
flashdisk compatible containing music files. Current limited to 1A.
6
BT100
The supplied Cambridge Audio BT100 Bluetooth adaptor should be plugged in here
adding wireless streaming bluetooth (A2DP/AVRCP) audio capability directly from
most phones, tablets and laptops. See later section for details.
7
Ethernet
Ethernet port for connecting to a 10/100BASE-T local area network (LAN) if
required.
8
Sub out
For optional connection to a powered subwoofer.
9
Digital D1 and D2 Inputs
Toslink and S/P DIF co-axial digital inputs.
These inputs can be renamed when displayed on the front panel, see later section
of the manual.
Note:
To obtain the best results from your system we recommend using only high
quality Cambridge Audio interconnects. This will ensure that you hear your system
as we designed it. Please ask you dealer for details.
10
Analogue A1 and A2 inputs
These inputs are suitable for any 'line level' source equipment such as CD players,
DAB or FM/AM tuners etc.
These inputs can also be renamed, see later section of the manual.
Note:
These inputs are for analogue audio signals only. They should not be
connected to the digital output of a CD player or any other digital device.
1
2
3
4
6
5
8
7
9
10
6
