Cambridge Audio CXA61, Руководство пользователя

Страница: 7 / 14

CX A61/81
7
Front panel controls
1. STANDBY/ON
Switches the unit between Standby mode (indicated by dim power LED)
and On (indicated by bright power LED). Standby mode is a low power
mode where the power consumption is less than 0.5 Watts. The unit
should be left in Standby mode when not in use.
This product has APD (Auto Power Down) enabled as default. After
inactivity of 20 minutes, the product will automatically switch to Standby.
See the 'Setup menu' section for further details.
2. MP3 INPUT (CXA61 ONLY)
This source input allows you to connect a portable audio device such as an
MP3 player directly into the front of the unit using the 3.5mm stereo-jack.
Note: The MP3 input can only be selected when a jack is inserted. Plugging
in a device into the jack socket automatically selects the MP3 input. With
the jack inserted pressing the A4 button will toggle between A4 and MP3
inputs. The MP3 input is shown by A4 being lit orange.
3. HEADPHONES
Allows for the connection of stereo headphones with a 3.5mm jack
plug. Headphones with an impedance of between 8 and 600 ohms are
recommended.
Note: Plugging in headphones will automatically mute the loudspeaker,
pre-out, and sub outputs.
4. ANALOGUE SOURCE SELECT BUTTONS
Push the appropriate input selection button to select the source that you
wish to listen to.
Note:
On the CXA81, pressing the A1 input selection button will toggle
between balanced and unbalanced. The balanced input is shown by A1
being lit orange.
5. PROTECTION INDICATOR
See the 'CAP5' section for further details.
6. SPEAKER A/B
Press to scroll through the speaker sets connected to the loudspeaker
terminals on the back panel (speaker sets A, B or A and B). This can be
used for listening to an extra set of loudspeakers in another room. See the
'Connections' section for further details.
7. MUTE INDICATOR
The light will flash to show the outputs are muted.
8. DIGITAL SOURCE SELECT BUTTONS
Push the appropriate input selection button to select the source that you
wish to listen to.
Note:
Pressing the Bluetooth/USB button will toggle between the two
inputs. The USB audio is shown by the symbol being lit orange.
9. VOLUME
Use to increase/decrease the level of the sound from the outputs of the
amplifier. This control affects the level of all outputs.
1 2 3 4 5 7 6 9 8