Cambridge Audio CRX200, Руководство пользователя

Страница: 57 / 62

ZONE 2 SETUP GUIDE CX R200
7
1 Switch on Zone 2
– Using the remote: press and hold the Zone 2
button, then press the Standby button
– Using the Cambridge Connect app
– On Front panel: press the Zone 2 button
(Zone 2 will be shown on the display), then
press the Standby button
– In the Zone 2 Settings menu within the OSD:
Zone 2 Power On
2 Ensure the Back Amp channels are set to
‘Zone 2’ in the Speaker Setup.
CXR Setup Menu
Speaker Setup
Input Setup
Zone 2 Settings
Network Setup
General Settings
HDMI Output Setup
Advanced Setup
Speaker Configuration
Auto Setup
Unit
SW Selection
Back Amp Configuration
Ź
Ź
Metres
SubSubwoofer2
Zone 2
3 The Zone 2 source can be selected using
the remote control, front panel, app and the
Zone 2 Settings menu.
CXR Setup Menu
Speaker Setup
Input Setup
Zone 2 Settings
Network Setup
General Settings
HDMI Output Setup
Advanced Setup
Zone 2 Power
Zone 2 Source
Zone 2 Power On Volume
On
Source 3
- 30 dB
>OLUZL[[PUN[OLAVUL:V\YJL[VHU`ZV\YJL
[OH[ PZ KPɈLYLU[ MYVT [OL THPU aVUL VUS`
sources with a 2CH PCM (stereo) audio signal
are output to Zone 2.
If the selected Zone 2 Source has a multi-
channel audio signal (eg. BD player/5.1 satellite
signal) this cannot be sent to Zone 2 if the
Follow Main feature is not being used.
ZONE 2
Up to 5.2 speaker connection
HDMI
MAIN ZONE
SPEAKER CONNECTION TO ZONE 2
PLAYING DIFFERENT AUDIO IN EACH ZONE.
Notes:
࠮0UAVUL[V^H[JOSPZ[LU[VHKPɈLYLU[ZV\YJL
to the Main Zone, the Zone 2 source must be
stereo.
࠮;OL-4(4;\ULYHUK:[YLHT4HNPJ:V\YJLZ
are stereo and can always be played in
Zone 2. If a source is set to use audio from
an analogue input, or a digital input as 2CH
PCM, then this can also be played in Zone 2
^OPSZ[HKPɈLYLU[ZV\YJLPZILPUNWSH`LKPU[OL
Main Zone.
࠮(ZV\YJL\ZPUNH\K40VYHKPNP[HS
input must be set to 2CH PCM to be played
PUAVUL^OPSZ[HKPɈLYLU[ZV\YJLPZWSH`PUN
in the Main Zone.
࠮>OLU JVUÄN\YLK MVY AVUL [OL IHJR HTW
channels cannot be used for bi-amping or 7.2
PU[OLTHPUaVULZWLHRLYJOHUULSZPZ[OL
TH_PT\T ZWLHRLY JVUÄN\YH[PVU PU [OL THPU
aVUL^OLU\ZPUN[OLaVULZWLHRLYV\[W\[
࠮0[ PZ UV[ WVZZPISL [V JVUÄN\YL [OL ZLJVUK
subwoofer output for Zone 2 use.
࠮;OL;=ZV\YJL(9*PZVUS`H]HPSHISLPUAVUL
2 when set to Follow Main.
࠮>OLUAVULPZ6U[OL/+40V\[W\[PZHSZV
set to Zone 2. It is not possible to use the twin
HDMI outputs for dual (mirrored) displays
when Zone 2 Power is On (unless using the
Follow Main feature).